Pf136 white cream hardener 9-2-2008.xls

MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PF 136 WHITE CREAM HARDENER
Pro Form Products Ltd.
604 McGeachie Drive,
September 2, 2008
Milton, Ontario Canada, L9T 3Y5
(800) 387-7981
(613) 996-6666
Repair product
B3, D3B, C, F
SECTION 2 - HAZARDOUS INGREDIENTS
Proprietary
7732-18-5
7631-86-9
1317-65-3
SECTION 3 - PHYSICAL DATA
Paste with faint odour of benzaldehyde.
PF136 WHITE CREAM HARDENER 9-2-2008 Page 1 of 3 SECTION 4 - FIRE AND EXPLOSION DATA
X CARBON DIOXIDE
X DRY CHEMICAL
Full protective equipment including self-contained breathing apparatus should be used. If water is used, fog nozzles are preferable. Water may be used to cool closed containers to prevent pressure build-up when exposed to extreme heat.
Explosive decomposition may occur above 105°C.
SECTION 5 - STABILITY AND REACTIVITY
Yes - Under the recommended storage and handling conditions prescribed.
Strong acids, strong bases, strong oxidizing and reducing agents, organic acids, metal salt catalysts, amines.
Explosive decomposition may occur above 105°C.
Dense white smoke of benzoic acid, terphenyls, biphenyls, benzene and carbon dioxide.
SECTION 6 - TOXICOLOGICAL AND HEALTH HAZARD DATA
X SKIN CONTACT
X SKIN ABSORPTION
X INHALATION
X INGESTION
To minimize exposure, follow recommendations for proper use, as well as ventilation, and personal protective equipment in section 7.
Redness and itching or burning sensation may indicate eye or excessive skin exposure.
Irritation of eyes, skin, nose throat and digestive tract. May produce respiratory effects or skin sensitization. Prolonged or repeated contact may cause dermatitis. If ingested may cause nausea, vomiting, abdominal pain, intoxication. Large doses may produce cyanosis, severe depression.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: No medical conditions are generally recognized as being aggravated by exposure.
SECTION 7 - PRECAUTIONS AND PREVENTATIVE MEASURES
Use only in a well ventilated area. No respiratory protection required under normal usage conditions. Wear neoprene or equivalent gloves. Wear safety glasses with un-perforated side shields. Use only with adequate ventilation. Avoid contact with skin and eyes. Wash hands after using. Keep away from heat, sparks and open flame. Do not flame cut, braze weld or melt empty containers. During use and until all vapours are gone; keep area ventilated - do not smoke - extinguish all flames and other sources of ignition. Store below 38°C (100°F) (preferable between 18 - 30°C (64 - 86°F) to maintain active oxygen content. Do not freeze - separation may occur on thawing.
Remove all sources of ignition. Ventilate the area. Do not use combustible materials such as sawdust as an absorbent. Remove with inert absorbent material such as vermiculite.
Incinerate in compliance with all local, federal and provincial regulations Under the TDG Clear Language Regulations Section 1.17 - this product meets the Limited Quantity exemption.
Please refer to these regulations if shipping under this exemption.
PF136 WHITE CREAM HARDENER 9-2-2008 Page 2 of 3 SECTION 8 - FIRST AID TREATMENT
Flush eyes with gentle stream of water for at least 15 minutes. Get medical attention.
Remove from exposure, restore breathing. Get medical attention.
Do not induce vomiting. Rinse mouth with a full glass of water or milk. Get medical attention immediately.
In all cases see a physician if any problems persist.
SECTION 9 - PREPARED BY
MSDS DEPARTMENT - PRO FORM PRODUCTS LTD 1-800-387-7981 or info@proformproducts.com The information presented herein has been complied from sources considered to be dependable and is believed to be accurate but is not warranted to be, whether originating with the company or not. The information relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process. Customer should read and understand this MSDS sheet and package labelling before using the product. As with all chemicals, keep away from children and animals. FOR PROFESSIONAL USE ONLY. The hazard information contained herein is offered solely for the consideration of the user, subject to his/her own investigation and verification of compliance with applicable regulations, including the safe use of the product under every foreseeable condition.
PF136 WHITE CREAM HARDENER 9-2-2008 Page 3 of 3

Source: http://www.proformproducts.ca/data/docs/chemsheet_503_en.pdf

X zr 226/02

BUNDESGERICHTSHOF IM NAMEN DES VOLKES PatG § 21 Abs. 1 Nr. 4, § 38; ZPO § 69 ein Ausführungsbeispiel der Erfindung beschreibenden Merkmalen nur eines in den Patentanspruch aufgenommen, das die mit dem Ausführungsbeispiel erzielte technische Wirkung angibt, liegt darin auch dann keine unzulässige Erweiterung, wenn ein anderer Weg zur Er-zielung derselben Wirkung nicht offenbart is

Dr g’s medisense

Mandated Asthma Inhalers Reduce Global Warming by Ann Gerhardt, MD Bottom Line at the Top: CFCs contribute to global warming so they can’t be used in asthma inhalers any longer. The new HFA inhalers feel less forceful, but actually deliver more medication into the lungs. Asthmatics who use albuterol more than once a week should consider adding preventive medication. At times

Copyright ©2018 Drugstore Pdf Search