Comply plus

Common Name : DIMENSION CRBM FLEX REAGENT CARTRIDGE
Manufacturer : DADE BEHRING
Internal ID : QADM0125
Revision Date : 01-10-2004
File Name : 001735
Material Safety Data Sheet
----------------------------------------------------------------------
"DIMENSION" CLINICAL CHEMISTRY SYSTEM CRBM FLEX(R) REAGENT CARTRIDGE
QADM0125 Revised: 01/10/2004
----------------------------------------------------------------------
CHEMICAL PRODUCT/COMPANY IDENTIFICATION
Tradenames and Synonyms
CAT. NO. DF87
CARBAMAZEPINE FLEX(R) REAGENT CARTRIDGE
CRBM FLEX(R) REAGENT CARTRIDGE
"DIMENSION" CRBM FLEX(R) REAGENT CARTRIDGE
AMAPS 717087.901
Company Identification
MANUFACTURER/DISTRIBUTOR
Dade Behring Inc.
P. O. Box 6101
Newark, DE 19714-6101
PHONE NUMBERS
Product Information : 800-441-9250
Transport Emergency : CHEMTREC 800-424-9300
Medical Emergency : 800-228-5635 ext 284
COMPOSITION/INFORMATION ON INGREDIENTS
Components
Material CAS Number %
Carbamazepine Antibody Reagent
Sodium Chloride 7647-14-5 6
ProClin 300 0.2
Neomycin Sulfate 1405-10-3 0.01
Water 7732-18-5 >92
Carbamazepine Particle Reagent
GAFAC, neutralized 6
ProClin 300 0.2
Neomycin Sulfate 1405-10-3 0.01
Water 7732-18-5 >92
Common Name : DIMENSION CRBM FLEX REAGENT CARTRIDGE
Manufacturer : DADE BEHRING
Internal ID : QADM0125
Revision Date : 01-10-2004
File Name : 001735
Carbamazepine Assay Buffer
GAFAC 51811-79-1 0.6
ProClin 300 0.2
Neomycin Sulfate 1405-10-3 0.01
Water 7732-18-5 >96
HAZARDS IDENTIFICATION
Potential Health Effects
Since this mixture has not been tested as a whole to determine the
hazards by all routes of exposure, information is provided for
each hazardous component of the mixture to meet requirements of
OSHA's Hazard Communication Standard (29 CFR 1910.1200). The
effects noted occur from exposure to the pure component unless
otherwise noted.
INFORMATION FOR COMPONENTS
SODIUM CHLORIDE is an IRRITANT. Human health effects of
overexposure by inhalation, ingestion, or skin or eye
contact may cause nonspecific discomfort, such as nausea,
headache, or weakness upon ingestion; or eye irritation with
tearing, or blurring of vision on eye contact.
GAFAC is CORROSIVE to skin and eyes. Skin contact may cause
irritation with discomfort, rash, burning sensations,
inflammation, skin burns, painful blisters or ulceration.
Eye contact may cause painful stinging or burning of eyes
and lids, watering of eyes, conjunctivitis, opaqueness of
cornea, possibly leading to loss of sight. Inhalation of
mist could cause irritation to mucous membranes in nose and
throat with coughing and difficulty breathing.
NEOMYCIN SULFATE is harmful if swallowed, inhaled, or
absorbed through the skin. May case allergic skin reaction.
PROCLIN 300 is a skin sensitizer. May cause allergic skin rashes.
Carcinogenicity Information
None of the components present in this material at concentrations
equal to or greater than 0.1% are listed by IARC, NTP, OSHA or ACGIH
as a carcinogen.
FIRST AID MEASURES
Common Name : DIMENSION CRBM FLEX REAGENT CARTRIDGE
Manufacturer : DADE BEHRING
Internal ID : QADM0125
Revision Date : 01-10-2004
File Name : 001735
First Aid
INHALATION
Inhalation is not an expected route of exposure during normal use
of the product.
SKIN CONTACT
Flush skin with water after contact. Wash contaminated clothing
before reuse.
EYE CONTACT
In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes. Call a physician.
INGESTION
Ingestion is not an expected route of exposure during normal use
of the product. If ingested, consult a physician.
FIRE FIGHTING MEASURES
Flammable Properties
Material is a nonflammable water-based solution.
Extinguishing Media
Use media appropriate for surrounding material.
Fire Fighting Instructions
Evacuate personnel to a safe area. Wear full protective equipment.
ACCIDENTAL RELEASE MEASURES
Safeguards (Personnel)
NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL)
sections before proceeding with clean-up. Use appropriate
PERSONAL PROTECTIVE EQUIPMENT during clean-up.
Initial Containment
Common Name : DIMENSION CRBM FLEX REAGENT CARTRIDGE
Manufacturer : DADE BEHRING
Internal ID : QADM0125
Revision Date : 01-10-2004
File Name : 001735
Dike spill.
Spill Clean Up
Soak up with sawdust, sand, oil dry or other absorbent material.
Comply with Federal, State, and local regulations for reporting
releases.
HANDLING AND STORAGE
Handling (Personnel)
Avoid contact with eyes, skin or clothing. Do not store or
consume food, drink or tobacco in areas where they may become
contaminated with this material. Wash hands and contaminated
skin thoroughly after handling.
See product/insert sheet.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal Protective Equipment
Eye/Face : safety glasses
Protective Gloves : latex or nitrile
Exposure Guidelines
Exposure Limits: None Established
PHYSICAL AND CHEMICAL PROPERTIES
Physical Data
Self-contained cartridge with Particle Reagent in wells 1
and 2, Assay Buffer in wells 3 and 4, Antibody Reagent in
wells 5 and 6.
STABILITY AND REACTIVITY
Chemical Stability
Stable at normal temperatures and storage conditions.
Common Name : DIMENSION CRBM FLEX REAGENT CARTRIDGE
Manufacturer : DADE BEHRING
Internal ID : QADM0125
Revision Date : 01-10-2004
File Name : 001735
Decomposition
Decomposition does not occur under normal use conditions.
Polymerization
Polymerization will not occur.
DISPOSAL CONSIDERATIONS
Waste Disposal
Treatment, storage, transportation, and disposal must be in
accordance with applicable Federal, State/Provincial, and Local
regulations.
REGULATORY INFORMATION
State Regulations (U.S.)
WARNING - SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE
CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM- Neomycin Sulfate
OTHER INFORMATION
"DIMENSION" is a trademark of Dade Behring Inc.
----------------------------------------------------------------------
The data in this Material Safety Data Sheet relates only to the
specific material designated herein and does not relate to use in
combination with any other material or in any process.
Technical Assistance Center
Dade Behring Inc.
Newark, DE 19714-6101
1-800-441-9250
End of MSDS

Source: http://www.dadebehring.com/content/tech_info/msdspdfs/Lang00/US_MSDS/QADM0125-00.pdf