Microsoft word - material_safety_data_updated042006.doc
SAMPLE MATERIAL SAFETY DATA SHEET CHEMICAL PRODUCT Biodiesel (B100)
Methyl Soyate, Rapeseed Methyl Ester (RME)
Methyl Soyate: 67784-80-9; RME: 73891-99-3;
_______________________________________________________________________________________ 2. COMPOSITION/INFORMATION ON INGREDIENTS This product contains no hazardous materials. __________________________________________________________________________ 3. HAZARDS IDENTIFICATION Potential Health Effects: INHALATION:
Negligible unless heated to produce vapors. Vapors or finely misted materials may irritate the mucous membranes and cause irritation, dizziness, and nausea. Remove to fresh air.
May cause irritation. Irrigate eye with water for at least 15 to 20 minutes. Seek medical attention if symptoms persist.
Prolonged or repeated contact is not likely to cause significant skin irritation. Material is sometimes encountered at elevated temperatures. Thermal burns are possible.
No hazards anticipated from ingestion incidental to industrial exposure.
FIRST AID MEASURES
Irrigate eyes with a heavy stream of water for at least 15 to 20 minutes.
Wash exposed areas of the body with soap and water.
Remove from area of exposure; seek medical attention if symptoms persist.
Give one or two glasses of water to drink. If gastro-intestinal symptoms develop, consult medical personnel. (Never give anything by mouth to an unconscious person.)
___________________________________________________________________________________________ 5. FIRE FIGHTING MEASURES Flash Point (Method Used): 130.0 C or 266.0 F min (ASTM 93) Flammability Limits: None known
Dry chemical, foam, halon (may not be permissible in some countries), CO2, water spray
(fog). Water stream may splash the burning liquid and spread fire.
Use water spray to cool drums exposed to fire.
Biodiesel soaked rags or spill absorbents (i.e. oil dry, polypropylene socks, sand, etc.) can cause spontaneous combustion if stored near combustibles and not handled properly. Store biodiesel soaked rags or spill absorbents in approved safety containers and dispose of properly. Oil soaked rags may be washed with soap and water and allowed to dry in
well ventilated area. Firefighters should use self-contained breathing apparatus to avoid exposure to smoke and vapor.
ACCIDENTAL RELEASE MEASURES SPILL CLEAN-UP PROCEDURES Remove sources of ignition, contain spill to smallest area possible. Stop leak if possible. Pick up small spills with absorbent materials and dispose of properly to avoid spontaneous combustion (see unusual fire and explosion hazards above). Recover large spills for salvage or disposal. Wash hard surfaces with safety solvent or detergent to remove remaining oil film. Greasy nature will result in a slippery surface.
__________________________________________________________________________________________ 7. HANDLING AND STORAGE
Store in closed containers between 50°F and 120°F.
Keep away from oxidizing agents, excessive heat, and ignition sources.
Do not store or use near heat, spark, or flame, store out of sun.
Do not puncture, drag, or slide this container.
Drum is not a pressure vessel; never use pressure to empty.
___________________________________________________________________________________________ 8. EXPOSURE CONTROL /PERSONAL PROTECTION
If vapors or mists are generated, wear a NIOSH approved organic vapor/mist respirator.
Safety glasses, goggles, or face shield recommended to protect eyes from mists or splashing. PVC coated gloves recommended to prevent skin contact.
Employees must practice good personal hygiene, washing exposed areas of skin several times daily and laundering contaminated clothing before re-use.
___________________________________________________________________________________________ 9. PHYSICAL AND CHEMICAL PROPERTIES
Solubility in H2O, % by Volume: insoluble
Evaporation Rate, Butyl Acetate=1: <1
Vapor Density, Air=1:>1 Appearance and Odor: pale yellow liquid, mild odor ___________________________________________________________________________________________ 10. STABILITY AND REACTIVITY
This product is stable and hazardous polymerization will not occur.
INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID:
Combustion produces carbon monoxide, carbon dioxide along with thick smoke.
11. DISPOSAL CONSIDERATIONS WASTE DISPOSAL:
Waste may be disposed of by a licensed waste disposal company. Contaminated absorbent material may be disposed of in an approved landfill. Follow local, state and federal disposal regulations.
12. TRANSPORT INFORMATION UN HAZARD CLASS: N/A NMFC (National Motor Freight Classification):
__________________________________________________________________________________________ 13. REGULATORY INFORMATION: OSHA STATUS:
This product is not hazardous under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR 1910.1200. However, thermal processing and decomposition fumes from this product may be hazardous as noted in Sections 2 and 3.
CERCLA (Comprehensive Response Compensation and Liability Act): NOT
SARA TITLE III (Superfund Amendments and Reauthorization Act):
Section 312 Extremely Hazardous Substances:
If discarded in its purchased form, this product would not be a hazardous waste either by listing or by characteristic. However, under RCRA, it is the responsibility of the product user to determine at the time of disposal, whether a material containing the product or derived from the product should be classified as a hazardous waste, (40 CFR 261.20-24)
The following statement is made in order to comply with the California Safe Drinking Water and Toxic Enforcement Act of 1986. This product contains no chemicals known to the state of California to cause cancer.
__________________________________________________________________________________________ 14. OTHER INFORMATION:
This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. Such information is to the best of the company’s knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee of any kind, express or implied, is made as to its accuracy, reliability or completeness and we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user’s responsibility to satisfy himself as to the suitableness and completeness of such information for his own particular use.
MARLOWE’S DOCTOR FAUSTUS AND THE PARADOX OF THE RENAISSANCE Dr. Vitthal Gore, Department of English, Matrusri Engineering College, Saidabad, Hyderabad, A. P. Abstract: The Elizabethan Age began in the fourth quarter of the sixteenth century and continued for about fifty years. The age saw the movements of the transition which carried out the essence of the age. Christopher Marlowe
Dear Community Friend: Last year was economically difficult for so many people, and 2011 promises to bring more financial challenges. In response to even greater need, Abbott is increasing access to our HIV medications, Kaletra® (lopinavir/ritonavir) and Norvir® (ritonavir). Working with community leaders in the United States, Abbott is making some important changes and expanding several existi