Le métronidazole (Flagyl) reste la référence dans le traitement des infections anaérobies et des parasitoses comme la giardiase ou l’amibiase. Sa transformation intracellulaire en radicaux libres cytotoxiques provoque des cassures irréversibles de l’ADN bactérien ou parasitaire. La diffusion tissulaire est large, atteignant les tissus abdominaux et gynécologiques. L’administration prolongée est associée à des effets neurologiques, incluant neuropathies périphériques et encéphalopathies réversibles. L’association avec l’alcool déclenche une réaction de type antabuse. Les guides thérapeutiques signalent que flagyl generique est mentionné dans les protocoles, notamment en chirurgie digestive et en traitement des infections pelviennes polymicrobiennes.
Sec_a_temp_cmyk
Immersion Temperature Transmitter Wireless Sensors Features & Options
● 8 Year Battery Life (with two 3.6V lithium batteries, full AA size)● 100 foot range, extendable to 1,000 feet with Repeater● Transmitted signals can be converted to Voltage, Current or
● Probe Lengths: 2”, 4” and 8” (fit standard BAPI Thermowells)● Watertight BAPI-Box Enclosure and Stainless Steel Probes
Wireless Immersion
● Etched Teflon Leadwires & Double Encapsulated Sensors
Temperature Transmitter
BAPI Wireless Immersion Units are available in 2”, 4” and 8” probe lengths. The sensor is pottedinside a 1/4” stainless steel probe with thermally conductive epoxy. The Immersion Units come withetched teflon leadwires, double encapsulated sensors and a BAPI-Box enclosure to withstand highhumidity and condensation and perform under real world conditions.
The Wireless Immersion Temperature Transmitter measures the temperature and transmits the
data through 418MHz RF to a receiver. It has a minimumin-building range of 100 feet and an estimated battery
BAPI Thermowells
life of 8 years using two high-capacity 3.6V lithium
batteries with a transmit rate of about once every 10
seconds. Each transmitter has a unique address with
built in error detection. Each variable sent by the
transmitter is picked up by the receiver and converted by
a BAPI Analog Output Module to a voltage, current or
resistance signal which is sent to the controller. The unit
can be set up to trigger an alarm on the controller whenthe batteries need replacing. PART NUMBER: BA/WT-I-2” - Wireless Immersion Temperature Transmitter, 2” Probe Length PART NUMBER: BA/WT-I-4” - Wireless Immersion Temperature Transmitter, 4” Probe Length PART NUMBER: BA/WT-I-8” - Wireless Immersion Temperature Transmitter, 8” Probe Length PART NUMBER: BA/LI3620 - Lithium Battery 3.6V *Custom Lengths of 1/4” Diameter Stainless Steel Probe are Available. Call BAPI for more information.Specifications Supply Power: Two 3.6V Lithium batteries, 8 year battery life at 10 second transmit rate Inputs: Built in thermistor Accuracy: ±0.2 °C Transmitted Range: -40° to 85°C Environmental Operation Range:
Temp: -40°C to 85°CHumidity: 0% to 100% RH, non-condensing
Enclosure Rating: IP66 Enclosure Material: UV-Resistant Polycarbonate Material Rating: UL94 V-0 Radio Frequency: 418 MHz Transmitter Interval: ~10 seconds Antenna: Built inside the enclosure Wireless Immersion Temperature unit in a BAPI-Box (BB) Enclosure FCC Approval: FCC ID# T4F060811TEMP
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com
P&G South Africa 2004 HIV/AIDS Report 1 A. Introduction B. Governance Indicator 1. Indicator 2. Overall Strategy for Managing HIV/AIDS Risk Indicator 3. Indicator 4. Indicator 5. Indicator 6. Current and Projected HIV/AIDS Prevalence and Incidence Rates Indicator 7. Current HIV/AIDS-Associated Costs and Losses Indicator 8. Future HIV/AIDS-Associated Costs